Looking On The Bright Side of Servers

A Guide to Data Center Lifts

Installing some heavy IT equipment pose huge amount of risks to valuable employees especially if it’s done manually. This is why you’re making the right decisions for using data center lift to do all the moving. But prior to buying any server lift, there are some important points that you have to take into mind and this will be discussed in the next lines.

Number 1. The device should be purpose built for data centers – basically, there are 2 aspects that should be considered regarding this issue and one pertains to suitability of server lifting device to the data center environment and two is about the potential for policy or code violations. Common error is to buy a server lift device that’s designed primarily for general purpose or to warehouse applications. Most of the time, they aren’t maneuverable easily in data center aisle, don’t have the mechanism to extend into rack for easy and safe installation and have inadequate braking system.

If ever the lift device is using hydraulic oil or fluids in any of the said mechanisms, then it might be violating data center policy. These codes and policies are meant to protect the equipment and people and must be followed strictly.
The Essential Laws of Lifts Explained

Number 2. Lift system should be able to insert equipment into racks – most of the general purpose lift system can lift equipment to the desired height but it is not able to hold it in place into rack while it’s fastened in position. It requires technicians to firmly hold the device when installing heavy equipment with gap underneath.
Smart Tips For Uncovering Servers

The only way for a single technician to install the heavy equipment safely and without asking for help is when the lift system can hold the equipment intact in the rack while fastened.

Number 3. Do not risk radio frequency interference – all IT equipment similar to switches, servers as well as power supplies are all governed by regulations for RFI or Radio Frequency Interference. Signals on the RFI could be caused by different electrical devices and the most common one is coming from powerful magnetic field that’s generated when stopping or starting electric motors. Magnetic surge near the communication equipment can result to data interference and in more extreme cases, can damage the equipment.

In an effort to eliminate RFI damage, it is recommended to have a hand operated device. One with a high ratio gearing must be adequate for average staff to operate without facing much difficulty. In an effort to accept the weight of switches, power supplies, batteries and servers your company used today, the data center lift device must be rated.